RAZOR_MAIN

Select a Wheatstone Radio Product:

  1. LX24_SLIDE
  2. G6_SLIDE
  3. G9_SLIDE
  4. E4_SLIDE
  5. AURA8IP_SLIDE
  6. G4_SLIDE
  7. MADI_BLADE_SLIDE
  8. SIDEBOARD_SLIDE
  9. G5_SLIDE
  10. E1_SLIDE
  11. SIDEBOARD_RACK_SLIDE
  12. E6_SLIDE

RAZOR BLADE Single I/O Digital interface

WheatNet_IP_LogoThe RAZOR BLADE is designed to let you inexpensively and quickly drop a one-space digital I/O rack unit anywhere your network requires it. It's ideal for interfacing a satellite receiver, and ISDN codec, a telephone hybrid, or any other single I/O device to the WheatNet-IP Intelligent Network.

  • Overview
  • Features
  • Images
  • Resources

The front panel of the RAZOR BLADE has two pairs of 10-segment LED bargraph meters which display the input and output signal levels. There’s also a power LED and a communications status LED to indicate that the network connection is active.

The rear panel has AES inputs and outputs on XLR connectors, a WheatNet-IP Ethernet port, and an RJ-45 connector which carries the universal logic ports.

The unit is set up, configured, and controlled via Wheatstone’s familiar WheatNet-IP Navigator software. Like all BLADEs, it is ready for use the moment it’s connected to the Intelligent Network.

  • 1 AES Digital Input on XLR
  • 1 AES Digital Output on XLR
  • 6 Bi-directional logic ports on RJ-45
  • WheatNet-IP Ethernet port
  • Setup and control via WheatNet-IP Navigator software
  • Affordably priced
Click an image below to enlarge it to the full width of your screen. While the image is enlarged, you can hover your mouse cursor over it to magnify the picture.
RAZOR BLADE Front PanelRAZOR BLADE Front Panel
RAZOR BLADE Front Panel		 RAZOR Rear PanelRAZOR Rear Panel
RAZOR BLADE Rear Panel

Folder IconRAZOR BLADE Single I/O Digital interface

#NameSizeLast Updated On
1Razor Blade Cut SheetRazor Blade Cut Sheet (View)287.06 kBJun 10, 2011


Banner
Banner
Banner
Banner